Chip Resetter for Epson 7800 9800
Detailed Product Description

Method of Application:

1. Fit the chip to the groove of chip resetter,and enable the probe of chip resetter contacts the contactor of the chips.
2. Press the 2 components together. If the red light gleams ,it means the
connection is fine.
3. 5 seconds later, the red light turns to green light,and it means the chip data has been refreshed.

4. Refill dye inks or other brand compatible ink ,and the cartridge could be used again.

Failure analysis:

A).Red indicator light gleams, then it always shines ,does not turn to green light.
Reason 1:The probe and the chip contactor do not connect well, or the chip contactor is contaminated.
Reason 2:If the cartridge is not Epson OEM cartridge ,the chip contactor
could not connected with the probe well .
B).After reset the chip,and refill the inks,there are broken lines while printing.
Reason 1: Refill ink quality is bad.It is recommend to use ink that could match Epson OEM products in color and related features.

Reason 2:There are air bubbles while refill inks,you should refill inks slowly. Or before you use the ink cartridges,keep the cartridge with the nozzle downward for 24 hours.

Advantages:
1.Can reset original chips;
2.with battery power/USB interface;
3.easy to operate
3.save money and protect environment.