Home > Products > Consumer Electronics & Lighting > Lighting > LED Lighting

INTRODUCTIONS:

Low-Carbon LED tubes are the ideal replacement for the conventional fluorescent tube,energy-saving up to 70% .Designed with advanced heat dissipation technology,used high brightness SMD LED and super internal constant current driver,Low-Carbon LED tubes are brighter than conventional fluorescent tube,better than most similar LED tubes in the market.

TECHNICAL PARAMETERS

1，Module No:LC-T8A-60CM-10W

2，LED quantity:144PCS

3，Rated Power: 10W

4，Input voltage: AC85-265V 50-60Hz

5，Tube Color Temperature: 2800k-3200k / 2800k-3200k / 5500k-6500k

6，Tube luminous flux:1030lm±100lm(Transparent PC) /

7，Tube Illuminance:1M>350Lux 2m>90Lux 3m>43Lux (Transparent PC)

8，Conversion Efficiency: 93%

9，Tube Power Factor : 0.98

10，Beam Angle:120°

11，Dimension：∮30*L590mm

12，Operate Temperature：-20~+50 Celsius

13，Storage Temperature：-20~+50 Celsius

14，Color Rendering Index：>70

15，Tube Material: Aluminum& Trasparent PC/Frosted PC

16，Equal to traditional fluorescent lamp:18W+4W (Ballast Power)Philips or Osram

FEATURES:

1，Hight brightness: Taiwan Epistar chip, light efficience of tube reach to 105Lm/W.

2，Super driver: Conversion efficience above 90% and power factor above 0.98.

3，Patented designed PCB: Only fail one LED not one series LED if any one LED die.

4，Thermal technology: Advanced technology with first class radiator materials.

5，Modular structure: Modular design, easy assembly and disasemmbly.

6，Certificate: CE, PSE, FCC, C-tick approval and RoHS Compliant.

7，Warranty: 3 years

ADVANTAGES:

1,LED

Common:Dip or low brightness SMD LED

Low carbon:6-7Lm/pcs 3528 SMD

2,Driver

Common:85% efficiency,PF<0.92, 2 years warranty.

Low carbon: 93% efficiency,PF>0.97,3 years warranty

3,PCB

Common:FR-4 fibre PCB, heat resistance

Low carbon: aluminum PCB,good heat dissipation.

4,Circuit Design

Comon: one LED failure will lead one series die.

Low carbon: one LED failure will only one itself die.

5,Shell and heat dissipation

Common: PC or aluminum shell,no dummy plate,seriously light decay,shorter lifetime.

Low carton: Use aluminum shell with plate silica gel pad under PCB,good isolation capacity and heat dissipation.

6, Driver protection&connector

Common: No driver protection housing or only use insulation paper,no male-femal connector.

Low carbon: Use PC housing to isolate driver from aluminum shell , more safe.Use maile-female connector,change driver after 35000 hours and extend tube life over 50000 hours.

7,Packing

Common: Each LED tube packed by outside boxes or only hard paper tube.

Low carbon: Each LED tube packed by PE bag and hard paper tube with protection caps for pins,20 pcs tube per carton.

8,Caps

Common: Metal caps with holloy pins,no screw but fixed by glue,can not be dissassembled.

Low carbon: Plastic caps with solid copper, surface silver plated ,better electrical conductivity and more strong,Rotatable cap available.

9,Aging Test& Inspection

Common: only 12 hours aging test and do not full inspection before shipment.

Low carbon: 48 hours continuous aging test,do full inspection before shipment.

10,Certification and Warranty

Common: No safety and EMC certificate,only tow years warranty。

Low carbon:with safety and EMC certificate ,provided three years warranty.

APPLICATION

Ideal replacement for conventional downlight, widely used for hotels, office, passenger interiors, shops, supermarket, airport, station., etc.

INSTALLATION

To avoid the danger of being shocked or electrocuted ,turn off power to the fixture and unplug or detach fixture from source of power. Removal of the ballast and started in the fixture are required. Please see our product support section for important information and details on removing the ballast in your fixtures.

PACKAGE

1，Outer Carton: 650*225*185Mm(20Pcs/Box)

2，Net weight per tube: 237G

3，Gross weight per tube: 365G

4，Gross weight: 8.0Kg/Carton