Home > Products > Electronics & Electricity > Electronic Instrument > Electronic Type Process Control Instrument

1. The framework (patent) of the cabinet is made by connecting double tube section and special tee, can select assembly and welding structures and has firm structure and beautiful appearance.
2. The lower edge of the door plate is 25mm from the ground, and the rectangular frame fixed on the door plate is equipped with round holes every other 25mm, which enhances the strength and can be used for installing wire harness, electrical appliances and other elements.
3. The mounting plate can take 25mm distance as the unit to move back and forth, so as to adjust the depth
4. Four sides of the double tube section are equipped with round and square mounting holes at 25mm interval, facilitating the internal installation and fixation of instruments.
5. The top cap, side plate, rear plate and bottom plate, fixed by threads, have easy dismounting, and the installation in the cabinet is easier.
6. The full-automatic gluing equipment is equipped with upper, middle and lower three-point lock, ensuring the seal of the cabinet, and its protection grade is IP55.
7. Three cover plates of bottom plate incoming holes can be replaced mutually and move freely, facilitating the leading of cables, the opening of the holes and incoming of wires.
8. The base is convenient to assemble and disassemble.
9. Specifications and open pore changes are customizable according to customer demands.

※ Surface Treatment: Degreasing, pickling, phosphating, electrophoretic primer, electrostatic spraying or stainless steel wiredrawing
※ Material: High-quality cold-roll steel sheet or SUS304 stainless steel, door thickness: 2.0mm, cabinet thickness: 1.5mm, mounting plate: 2.5mm
※ Color: Main color: RAL7035, mounting plate color: Galvanized sheet RAL200