|
Solar Charger Controller
The Solar Charge Controller could store DC generated by solar panels into battery, which could effectively provide living and
industrial using electricity in some remote areas and tourism destination areas where have no electric power facilities and
electricity network, and have no negative effect on environment.
Solar Charge Controller apply to all types of photoelectric panels and various types of batteries, MCU (Micro Processing
Controller) has PMW (Pulse Modulation Widefrequency) 0~100% variable duty cycle process. Depending on the types and
actual charging situation of the battery, CNCD controller series can provide the fast and best charging voltage and electricity
from the PV panel. Solar Charge Controller are equipped with advanced manmachine interactive function, sothe user can
adjust the charging voltage.
Function:
1. Overloading protection
2. Short circuit protection
3. Conversed discharge protection
4. Reversed polarity connection protection
5. Thunder protection
6. Low voltage protection
7. Overcharge protection
8. Batteries stop and charge voltage HVD sets up
9. Charge and low voltage LCD sets up
10. Display the capability of the battery SOC
11. Loads and comeback setups.
12. Intellectualized temperature compensation
13. Store, calculate and display the charged AH on the LCD screen.
14. Store, calculate and display the discharged A on the LCD screen.
15. CPU control and LCD-display
Specification:
|
Model
|
CNCD-30Amp
|
CNCD-40Amp
|
CNCD-50Amp
|
|
Rated Voltage
|
12V/24V/48V Automatic distinguish voltage
|
|
Loading current Max
|
30A
|
40A
|
50A
|
|
Full charge cut
|
13.7V/27.4V/52.8V
|
|
Low voltage cut
|
10.5~11V/21V~22V/432.-44V
|
|
Temperature compensation
|
-3mv//cell
|
|
No load loss
|
≤45mA
|
|
Wire area Min
|
6mm2
|
|
Voltage drop
|
<200mv
|
<240mv
|
<270mv
|
|