 |
|
|
Thin-film filter (3 in conjunction with pump) hot product
|
|
This Co. have total
2
Related Items
|
|
|
|
|
|
Thin-film filter (in conjunction with pump 3) main types: CN61M/SHG-3, the apparatus in
accordance with the 2005 edition of Chinese Pharmacopoeia sterility test experiments of the requirements to participate in international standard designed for sterilization filter, colony inspection and Determination of liquid particles.
Aperture: 0.45 micron
Diameter: 50mm
(A) Instrument features:
① avoid leaching bottles, light weight, small size, suitable for operation in the purification of the desks.
② shaped translucent filter was easy to observe, quantitative control.
③ filter with the base can support the replacement for the conventional test.
④ each filter with the valve can be used alone.
⑤ pressure, temperature, can be 121 ℃ 30 minutes in hot sterilized.
(B) Product specifications:
① 50mm filter diameter
② the effective volume: 100ml
③ Weight: 60g (single only)
④ material for polycarbonate, the density of silicone rubber ring for
⑤ with four stainless-steel chassis
(C) Note:
① before use, must be clean filter processing, the selected membrane should be soaked overnight.
② wet disinfection will be posted on the support membrane on the board, covered with sealing gaskets, fluid storage and bearing cups thread slightly tightened up and after the disinfection to be tightened up and wrapped in gauze for hot sterilized to prevent millipore rupture.
③ device covered with a hole, the needle can be set to filter the outside world filters the air, so as to avoid pollution.
④ This product is not acid, alkali and other chemicals.
(D) to adapt the scope of:
① pharmaceutical industry Drug: Injection of soluble antibiotics and other drugs, sterility test.
② water, beverages and food inspection colony.
③ hospital clinical laboratory medicine: body fluids of bacteria and determination of micro-organisms.
④ research, teaching the field of bacterial removal by filtration or check.
⑤ microporous membranes used in quality inspection.
Attract matching pump Products
First, the performance characteristics
It used lubrication oil-free vacuum pumps, high ventilation rates, no oil mist pollution, pump body without day-to-day maintenance and upkeep.
Liquid bottle hanging in the box next to a direct, compact structure, easy to carry.
Liquid bottle diameter, and with a band of cork seal ring can be open and user-friendly cork tightly to facilitate removal of liquid sewage bottle.
Overflow protection devices to prevent inhalation of the liquid into the pump body.
To attract non-toxic PVC transparent hose, easy to attract observed liquid tube; unique design of pipe joints so that pipe connections more convenient.
With the air filter can reduce the inhalation of the bacteria were in the surrounding environment.
Manual switch and foot switch connected in parallel, arbitrary choice.
Operating stable, low noise, long life, safe and reliable.
Second, the main technical parameters
Limit negative pressure value: ≥ 0.09MPa (680mmHg)
Ventilation rate: ≥ 20L/min
Liquid bottle: 1000ml 1 months
Negative pressure adjustment range: 0.02 ~ 0.09MPa (150 ~ 680mmHg)
Noise: ≤ 60dB (A)
Power: AC 220V ± 10%, 50Hz
Input Power: 150VA
Work: the intermittent load of continuous operation
Overall dimensions: 330mm × 295mm × 360mm
Net Weight: 11kg
Contact: Hong-Bo Wang
Manager of the International
Western vision Technology Co, Ltd.
http://www.zxqc.cn
E-mail: sale5@midwest-g.com
Address: Haidian District, Beijing on the Third Street to One
Mobile: 18910282270
Tel :010-62965544 ext 249
Fax :010-62981256
|
|
|
|
|
click for larger image
Img 1
|
|
|
Related Products of this Company | |
|
|
|
|
|
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here. | |
China Suppliers Quick Searching:
, , , |
|
|
|
|
Inquiry Basket (0)
