K-718 remote control spray training collar
Ctn size:44*34*34cm Ctn qty:36pcs/ctn G.W.:18KG
Thank you for choosing our product! Please read this manual carefully before using the product. Please do read the Cautions, for fear that unwanted results arise from improper operation. The remote control spray training collar is the product that you can use to train your dog remotely. With this product , you can let your dog receive your orders or change your dog’s bad behaviors , such as running away, tracking others ,stealing food, digging dirty earth and attacking passerby. After being trained with the product , the dog will stop the bad behaviors mentioned above at once, even if the master isn’t on the scene. It can send out the correct action orders or warning signals , even if you are not on the scene , your dog also will follow your families’ and friends’orders using this product. Working principle: With a wireless remote control device ( we call it remote controller for short hereinafter) and a receiver collar(we call it receiver for short hereinafter) worn around the dog’s neck , the product can effectively control the aggressive dog caused by moody or overactive, it also can convey the action orders from the master. The valid distance is about 250 meters ( the valid distance may have a little difference in different environments ),besides , the product can send out seven different orders depending on your need: three kinds of action orders (BB sounds and vibrations ), three kinds of warning signals ( strong/medium/weak three different degrees of spray), and a calling order ( SOS Morse Mode ), to regulate the dog’s instant behaviors . They are controlled by seven different buttons on the remote controller separately . After being trained by the product , the dog will understand the orders from the master more quickly , knowing what behaviors are prohibited and what are rewarded. Tips: Though the product can stop the dog’s bad behaviors quickly , you need to spend some time on training the dog by using this product correctly if you want your dog to understand your orders completely. It will cost about four to five days for the dog to get used to the product and understand your orders . The product has no side effects like the dog feeling scared , hurt or painful. A、Preparation before using 1.Make sure that batteries are installed in the remote controller. Press the button on the remote controller, the indicator light will light. 2. Checking the remote controller: Press the buttons on the remote controller one by one, the indicator light will light. If the indicator light doesn’t light or goes dim, change the batteries. 3. There are seven buttons on the remote controller, the three buttons on the right send out action orders , the three buttons on the left send out warning spray, and the button in the middle is the calling button . 4．There is a magnetism induction power switch in the receiver. The part with blue spot in the bottom of the remote controller is magnetic. When the blue spot part of the remote controller approach to that of the receiver, the indicator light near the blue spot part of the receiver will flash. If it keep lighting after flashing about 3 seconds, that means the power switch of the receiver is on. If it doesn’t light or goes dim, it means it is short of power., then you should charge the battery with the special charger. Let the blue spot part of the remote controller approach to that of the receiver again, the indicator light will flash, and it will go out after flashing about 3 seconds, which indicates that the power of the receiver is off. 5. Checking the receiver: press the buttons 1.2.3 on the left one by one , the spray will come out from the receiver , to stop the dog’s bad behaviors. 6. Pressing the three buttons on the right can make three different kinds of BB sounds and vibrations, standing for three action orders or intentions from the master. Train the dog to let it understand and remember. 7. Press the button in the middle of the remote controller, the receiver will make a SOS Morse Mode sound , it can be used to call the dog. 8. Every time you press the buttons on the remote controller , the receiver will vibrates ,make sounds or send out spray correspondingly . You should let the pet know what should be done and what should not be done. After a number of trainings the pet will understand what you like and don’t like. 9. Adjust the length of the collar to fit the neck of the pet. The proper tightness should be that you can insert a finger in between. 10. Prepare some socks for the dog as rewards for good deeds. This will make better effect in the training. B. Operational instructions: a. How to change or charge the batteries: 1. The lithium battery installed in the receiver can be recharged. Please use the charger the product offers to charge it. The power indicator light of the receiver will flash when it is being charged. If the charging has been finished, it will keep lighting. It will cost 2 to 4 hours to charge every time. 2. Remote controller: The battery cover is at the lower part of the back of the remote controller. Open the cover by pressing it following the direction of the arrow. Take out the battery (Model 6LR61, 9V) and put a new one back and then close the cover. 3. The lifetime of the batteries varies according as how you use the product. Since the remote controller only consumes electricity when you press the buttons to send out signals, its batteries’ lifetime is usually more than one year. After the receiver is turned on, it is in a standby state. In the standby state, it only consumes small amount of electricity. If you don’t use the product, please turn off the power switch of the receiver. A frequent use of it will consume electricity quickly. Therefore you should often check whether the batteries have enough electricity by watching the indicator light. When the electricity of the batteries is not enough , please use the appropriative charger to charge the batteries.. b. How to turn on or turn off the power of the receiver 1 The electromagnetism induction power switch is installed in the receiver. Let the magnetic part of the remote controller approach to it, you can turn on or turn off the power of the receiver. 2 Approach the magnetic part of the remote controller to the electromagnetism induction switch of the receiver, then the power indicator light will flash. Keep it for three seconds,if the indicator light stop flashing, it means that the power has been turned on. If the indicator light goes out, it means that the power has been turned off. c. How to fix and refill the gas storage bottle 1 Screw off the positioning bolt. Rotate the gas storage bottle and pull it out. Put it in the receiver, and screw up the positioning bolt.(Don’t screw too forcibly, or the thread of the bolt will be damaged.）Then the fixing of the gas storage bottle will be finished. 2 When the gas storage bottle is short of spray, please take it down and use the refill bottle to refill. 3 The refill bottle is used to refill the gas storage bottle. Please upside down the refill bottle and insert the nozzle into the refill hole of the gas storage bottle. Press firmly to fill the unit. (20 seconds) C. Instructions: 1. At the beginning of using the product , don’t wear and take off the collar too often in four or five days , so that the dog can adapt to the product as soon as possible and won’t feel fidgety when wearing it . Be patient to help the dog get used to the product , don’t punish or treat it rudely because they don’t listen to you at first . If the dog follows you to use the product , reward it immediately and properly. 2. Once the dog can understand the order you send by the receiver , you should require your dog to make a clear and correct response to your every order. Don’t use it without purpose, or it will confuse the dog. If you have worn the receiver collar for the dog , don’t wear other types of collar. 3. Ensure the product is in the working condition at any moment , we suggest you check it everyday. 4. Before each specialized training , let the dog wear the collar for about 20 minutes to get used to it . You can train your dog with the receiver, and combine it with your body movements or other instruction methods . You can refer to other related books and materials about this . Please pay attention to the related books we published. If you want the product to achieve the expected maximum effects, you need to make specific training to the dog. D. Cautions:
The product isn’t a toy , don’t let the children use it , and don’t use it casually.
Before using the product, make sure your dog is healthy.
Don’t immerse it into the water. You’d better not use it in the rainy day.
Please clean the product with dry cloth.
Don’t let your dog catch or bite the product. When the electricity of the batteries in the receiver is not enough, please charge them in time. We strongly suggest that you should charge the batteries with the charger we offer.
Don’t disassemble the product , the damage caused by it isn’t in our warranty scope. If the dog feels uncomfortable when wearing the collar , you can take it off for a while, and use it again when the dog calms down. The temperature the product can be used in is between 2 and 45 centigrade. Beyond or below this temperature range will damage the product , and this kind of damage isn’t in the warranty scope. The product can only be used on the healthy dogs. If the dog has had physical or mental problems , please turn to the professional veterinarians first. E. Common problems: Please confirm the remote controller and the collar are from the same packaging product.
Please make sure the batteries have enough electricity. If the distance between the remote controller and the receiver is too short, less than one meter, the product may not work properly.
Dog is our intimate partner and loyal friend , so please treat your dog well.
|
Inquiry Basket (0)
