|
Name: High Pressure Press Machine
Model:GB-IB3838 GB-IB
parameter:
Voltage:110v 220v 380v
power:1800w
Temperature range:0-399℃
Time range:0-999sec
Work table size:38*38
Casing size:70*44*54
Avoirdupois:40kg
Use:
This machine can press sublimation, impregnant printing ink color picture on cotton, hemp, fibre and another fabric by heat press, can use in technics heat treatment as silk screen painting, tempera painting and froth printing.and also can print any color mark, photos or pictures on the ceramic plate or metal plate .It is particularly suitable for medal, souvenir , tombstone image , culture T-shirt and so on. economical and practicably .
Characteristic ;
1..digital control system PID Micro-computer controller .high precision ( 1℃) has mirco-switch knob .
2.. all digital time show , high accuracy .
3.. Heat Tube integrate with Heat Board in one unit , safety, durable, heat distribute uniformity. and strong heat exchange
4. There is a protecting layer which composed of fluorin and titanium on heating plate
5. There is a silica gel pad which can withstand 400 centigrade and doesn’t distortion.
on the motherboard
6..beautiful appearance, small and exquisite ,effective improve working efficiency .
Operation:
1.Plug the power and turn on the general switch and the indication light bright.
2..Adjust the temperature regulator to suitable temperature .when temperature reaches the set point, the indication light will go out .then can be start to work.
3. Adjust timer button to a suitable time,
4. Put the clothes on the heating plate, then cover with the transfer paper on the clothes,( please note the obverse and reverse of the paper).press the handle down until the end .
5..The buzzer will alarm when time is over , at this time you should take the handle up to the original place.
Notice:
1. must have a suitable and firm earth wire for protection .
2. In order to avoid handle distortion , please don’t force the handle more than 30 kg.
3..please note the obverse and reverse of the paper when cover the heat transfer paper.
4..if want to tear off the transfer paper in the cold condition , please wipe the paper by brush first , wait 5-10 second , then tear off the paper
5..if want to tear off the transfer paper in the hot condition. please tear it off immediately after printing
6..A suitable time, temperature and pressure are all important factors to a successful transfer printing; and the thickness of the clothes, the material and the kind of the transfer paper can also influence the effect.
7..we are provide all kind of heat transfer paper
8.Please test for print before produce as batch
Maintenance:
1, Pressure: if the pressure is not enough or too big, you can loose the pressure screw to adjust it. Please close the adjust lock screw. firm after adjusted.
2., Temperature: if the temperature was reached the set point but the heating plate does not work. Please Check the temperature controller was connect the power or not while confirm whether the electrical source broken or not .
( temperature controller needs about 15minutes to reach 180 centigrade from 0 centigrade ).
3.Time: when time is over but the buzzer does not alarm or alarm endlessly, please check the micro-switches point whether have a suitable distance. Please adjust to the suitable position if unconventionality .
4. this machine was made of eccenter configuration ,please don’t adjust the extent of pressure too big in order to avoid axletree damage .
5.please contact us if have any quality problem.
|
Inquiry Basket (0)
