| Comment： |
The 2 input levels are displayed by rows of 6 level leds + 1 clip led. The 6 output levels are displayed
by rows of 5 level leds + 1 clip led + 1 Limiter led. The unit has 2 analog inputs, a stereo digital input,
and 6 analog outputs. Each input has 5 parametric filters which can be selected. Each output has 7 parametric
filters which can be selected, a Hp and a Lp filters up to 24dB/Oct. Output Limiters are working on the signal
RMS value. Linking functions between inputs and linking functions between outputs are available. A function
is allowing to have ramps closing the output level on parameter changes, when the unit is used as installation
unit; this function can be excluded when the unit is used live and it is necessary to perform small changes to
the set parameter...on the fly. The Pc SW for the remote control is allowing to connect in net more units
Delay & Gain
Maximum Delay: 848.998ms by 21us increment/decrement step, on
each Input and Output channel
Spdif input gain(Digital): 0dBu on RCA connector
Parametric Equalization: 5 filters on each input assignable as Bell or Shelving
7 filters on each output assignable as Bell or Shelving
Filters: Symmetrical Bell or High/Low Shelving up to second order
Filter gain: for Bell and Shelving the gain is ranging from -15dBu up
to +15dBu by 0.5dBu resolution steps
Centre frequency: selectable with a 1/24th of octave resolution steps from
20Hz up to 20kHz
Filter Q/BW: Q from 0.05 up to 3 by 0.05 resolution steps
|
High pass and Lou Pass Filters
Frequency(HPF): from 1st order (Butterworth -6dB/Oct) up to 4th Order
(Butterworth, Linkwitz or Bessel -24dB/Oct)
Frequency(LPF): from 1st order (Butterworth -6dB/Oct) up to 4th Order
(Butterworth, Linkwitz or Bessel -24dB/Oct)
Response: from 20Hz up to 20kHz
Filter’s setting step: 1/24th of octave
Limiters
Threshold: from 20dBu up to -10dBu
Attack time: Attack time from 5ms up to 200ms (1ms resolution up to
20ms, then 10ms resolution up to 100ms and 20ms
resolution up to 200ms)
Release time: Release time from 0.1 sec up to 3 sec (0.1sec resolution)
Specifications
Inputs: XLR balanced
Outputs: XLR balanced
Minimum Load: 150ohm
User memories: 24
Recall memories: 24
VU metering: 7 led for Inputs [-20dBu up to +15dBu; Clip]
7 led for Outputs [-20dBu up to +15dBu; Clip; Limit]
Output Leds can be used for displaying the Output
level OR the Limiter activity
THD+N: 0.001% at 1kHz 0dBu
S/N: >110dB
Frequency Response: 20Hz – 20kHz; -0.5dBu at 20Hz and 20kHz
A/D and D/A Resolution: 24bits
Process Resolution: 24x32 bit for filtering process; 96 bits resolution on
intermediate computation results
Display: Graphic 2x20 characters
Size: 19”x(1U)
Process: up to 24dBu/Oct HP/LP, +-15dB gain Bell and Shelving filters, RMS
compressor/limiter[Attack time from 5ms up to 200ms (1ms resolution
up to 20ms, then 10ms resolution up to 100ms and 20ms resolution up
to 200ms), Release time from 0.1 sec up to 3 sec (0.1sec resolution)],
delay on Inputs and Outputs up to 848.998ms with 21us increment steps.
|
Inquiry Basket (0)
line array speaker, pro-audio,
