|
PSEN 1.1-20 PSEN 1.1p-20 at SRINUTCH.COM
Description
The safety switch PSEN 1.1p-20 include the
actuator (magnet) PSEN 1.1-20.
Features:
• 2 reed contacts (2 N/O contact)
• Magnetic operation
• Switching voltage 24 V DC
Installation
• The mounting position can be freely
selected. Safety switch and actuator must
be installed parallel and opposite each
other.
• If possible, do not install the safety switch
and actuator on ferromagnetic material.
Changes of the switch offsets are to be
anticipated. In this case, use the distance
plate order no. 534 310.
• The safety switch and actuator should
only be secured using M4 screws on
which the underside of the screw head is
flat (e.g. M4 cheese head or pan head
screws). Torque setting max. 1 Nm. Use
screws that are made from non-magnetic
material (e.g. brass).
• Two systems consisting of a safety
sensor and a actuator must have a
distance of at least 25 mm.
Safety switch and actuator:
• keep away from iron cuttings
• do not expose to strong magnetic fields
• do not expose to strong shocks or
vibration
• do not use as dead stop
Reedkontakte/Betätigung magnetisch
reed contacts/magnetic operation
contacts reed/validation magnétique
8 mm
0,5 mm
26 mm
24 V DC
500 mA
10 W
1 Hz
gerätespezifisch/device-specific/
spécifique à chaque unité de contrôle
PSEN 1.1-20
-10 ... +55 °C
Frequenz/Frequency/Fréquence: 10 ... 55 Hz
Amplitude/Amplitude/Amplitude: 1 mm
30 g, 11 ms
4pol. M8-Stiftstecker/4-pin M8 connector/
connecteur M8, 4 br.
LiYY 4 x 0,25 mm
IP65/IP67
Kunststoff/Plastic/Plastic
PBT signalgelb/signal yellow
36 x 26 x 13 mm
PSEN 1.1p-20: 14 g, PSEN 1.1-20: 17 g
2
|
Inquiry Basket (0)
