 |
|
|
4E1/8E1/16E1 PDH Multiplexer
|
|
|
|
Overview:
4E1 PDH Multiplexer can multiplex 4E1 and 1 optional port Ethernet (10/100Mbps line speed) signals in one fiber channel to transmit. It is suitable for low capacity, point-to-point application of remote transmission. The circuit part of the equipment is fully digitized. The whole equipment is reliable, stable, easy to install and maintain. It has good temperature and voltage characteristics, complete alarm functions, one RS232 asynchronous interface and remote loop back functions (from software). At the same time, it can be managed from management software Fi-View-MP.
Features:
- Provide up to 4E1 channels and 1 optional port 10/100Mbps Ethernet channel
- Fiber port bit rate: 150Mbps, up to 120Km distance without repeater
- E1 Line code: HDB3, compliant to G.703, G.823 and G.742.
- E1 channel support both 75ohm & 120ohm impedance
- Ethernet port support 10/100Mbps auto-detection, Full/Half Duplex auto-negotiation
- Ethernet port can transmit VLAN tag
- Complete alarm functions
- Provide an RS232 asynchronous interface
- Support the local/remote E1 loop back
- Remote loop back provided by software and hardware
- Provide RS232 port for management, GUI interface
- Stand alone, 220VAC or -48VDC power supply optional
Specification:
◆ Electrical (E1 interface)
Channel capacity: 4 channels
Bit rate: 2.048Mbps±50ppm
Line code: HDB3
Nominal impedance: 75Ω unbalanced / 120Ω balanced
Jitter character: ITU-T G.742, G.823 compliant
◆ Optical:
Bit rate: 16.896 Mbit/s
Line code: 1B1H
Optical source: LD
Transmitter power: ≥－9dBm
Receiver Type: PINFET
Receiver sensitivity: ≤－40dBm（BER≤10-11）
Wavelength: 1310 / 1550nm
Optical connector: FC/SC
◆ Power supply:
Power input: AC/DC optional
Power consumption: ≤10W
◆ Environment:
Temperature: －5℃～＋40℃ for operation
－20℃～＋60℃ for storage & transport
Humidity: 10%～90% RH non-condensing
◆ Physical:
Standalone compact (19"/2)
Dimension: 220mm(width)×43.5mm(height)×150mm(depth)
Weight: 1.0 kg
Rack type: EIA 19"
Standalone (19")
Dimension: 440mm(width)×43.5mm(height)×150mm(depth)
Weight: 1.2 kg
Rack Type: EIA 19"
Rack Mount（19"）
Dimension: 483mm(width)×266mm(height)×225mm(depth)
Weight: 12 kg（full deploy）
Rack Type: EIA 19"
|
|
|
|
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here. | |
China Suppliers Quick Searching:
, , , |
|
|
|
|
Inquiry Basket (0)
