Home  >  Products  >  Electronics & Electricity  >  Power Transmission Equipment & Transformer

Features:

1)Input protections:

   Polarity reverse / Over and under voltage / Low battery Alarm and shut  down

2)Output protections:

   Short circuit / Overload / Over temperature

3)With power ON/OFF switch and LED indicator

4)Input and output fully isolation

5)Low power consumption(standby)

6)LVD meet EN60950 and E8 mark

7)EMC meet EN61000-6-1-3,EN55022

Specifications :

1) Max. continuous output power: 200W

2) Max. continuous output power 2H.: 225W

3) Surge capability peak output power: 400W

4) DC input static current (no load): ≤0.4AMP

5) AC output wave form: Modified Sine wave

6) Normal input voltage range: 11-15V / 21~30V

7) High voltage cut off level: >15V / 30V

8) Low voltage alarm: 10.6V±0.3V(DC12V) / 20.5V±0.5V(DC24V)

9) Low voltage cut off level: 9.5V±0.5V(DC12V) / 19.5V±0.5V(DC24V)

10) Output AC voltage : AC 115V±5% RMS / AC 230V ±5% RMS

11) Output frequency level: 60HZ±1Hz  /  50HZ

12) Overload power range: 200W, 5-30%

13) Hi-pot test: PRI/sec, 1500V/AC 5mA/60s

14) Temperature protection: <65°C

15) Full load max. optimum efficiency: ≥90%

16) AC output short circuit protection: system shut down (no damage)

17) Fan run: Working with load

18) Fault warning: alarm beep

19) LED indicator:

      a) Normal: green

      b) Fault: red green

20) Fuse (spade type): 25Ax 1pcs

21) Dimensions (L x W x H): 110x 88 x 47mm

22) Environmental condition:

      a) Operating temperature: -5~45°C 

      b) Operating relative humidity: 10-90% RH

      c) Storage temperature: -10~50°C

      d) Storage relative humidity: 10-95% RH

More informations please send mail to us(sunshine@sunshinele.com)