| Product Name:120W MINI DC/DC Car PC ATX Power Product Code:RICH1004 Power Ratings (Max Load = 150 Watts) At max load, forced air ventilation is required. For fanless operation de-rate the output of the 3.3 and 5V rails by ~20%. Peak load should not exceed 60 seconds. Size: 46.5mm(L) * 21mm(W) * 15mm (H) (1U compliant) Weight: 57gramms, including cable harness, 27 grams without cable harness. Input voltage:12V DC, DC-Jack: Female, panel mount, 2.5*5.5*10 mm. Connectors ：Molex 39-01-2200, two 3.5” drive power connector, 1 floppy. P4-12V 4 pin header adapter sold separately. Overload protection ：Over load protection will be effected when either of the loads (+5V & +3.3V) exceeds > 200% Max Load. Turn-on Delay ：After turning on, at least 20 ms will be needed for the rise of +5VSB output voltage (measured from 10% to 95%) to reach its peak. Remote ON/OFF control ：Logic level is LOW -Output voltage is enabled (PS_ON pin) Logic level is HIGH -Output voltage is disabled (PS_ON pin) Operating environment: Temperature: -20 to 85 degree centigrade. Relative Humidity: 10 to 90 percent, non-condensing. Efficiency, MTBF: 95%. MTBF=100K hours at 55Celsius Input | Output(V) | Max Load (A) | Peak Load (A) | Regulation% | 12V | +5 | 6 | 8 | +/-1.5% | +3.3 | 6 | 8 | +/-1.5% | +5VSB | 1.5 | 2 | +/-1.5% | -12 | 0.05 | 0.2 | +/-1.5% | +12 | 7 | 10 | Same as input |
|
Inquiry Basket (0)
Biz Member (1st Year)
;)
