| The automatic production line of 3 Dimensional, adopt PLC control system with touch screen, by pneumatic and stepping motor power, via auto oblique joint and cut off, the strict fixing of flat mesh and foam panel, the combined welding of oblique cutting wire and flat mesh, to finish the produce of iron wire mesh frame polystyrene sandwich panel. It has following character: automation production, high productivity, loss welding rate, large strength of welding point, welding uniformity, good surface, and the production cost is very low. The main parameter: Rated power: 75KVA Input power source: AC380V 50HZ Configuration of gas source: 3 cubic meter/ min 0.6Mpa Application range: thickness of core plate from 50mm to 100mm and structure of joint wire: single, double side mesh, spare, dense wire joint Manufacturing scale: Length 3000mm, Width 1220mm Length range Less than 4500mm Material: iron wire diameter available: cold drawing low carton steel wire, diameter from 2mm to 2.5mm Material of core plate: flame-resisting polystyrene foam plate Material of filament plate: Plate mesh in aperture 50mm*52mm Loss welding rate: less than 5% Strength of welding: per Dot more than 330N Measurment of the machine: L 13500mm, W 1800mm, H 1700mm Weight: 4000Kgs Rated power | 75KVA | input power source | AC380V 50HZ | Configuration of gas source | 3m3/min 0.6Mpa | Application range | thickness of core plate | 5mm - 100mm | Structure of Joint Wire | Single, double side mesh; spare, dense wire joint | Manufacturing scale | Standard | Length | 3000mm | Width | 1220mm | Non-standard | Length range ≤4500mm | material | Iron Wire Diameter available | Cold drawing low carbon steel wire Ø2-Ø2.5mm | Material of core plate | flame-resisting polystyrene foam plate | Material of filament Plate | Plate mesh in aperture 50mm x 52mm | Loss welding rate | ≤5% | Strength of welding | Per dot ≥330N | Measurement of the machine | Length | 13500mm | Width | 1800mm | Height | 1700mm | Weight | 4000kg |
|
Inquiry Basket (0)
