Home  >  Products  >  Electronics & Electricity  >  Electronic Instrument  >  Other Electronic Instrument

our Online Store has been opened, please visit www.LoggerOnline.com

Surface Profile Gauge Digital

The Paint Test Equipment Digital Surface Profile Gauge will allow the peak-to-valley height of blast-cleaned surfaces to be accurately measured in accordance with the ASTM D4417 Standard.

A simple to use Digital Surface Profile Gauge, offering a high resolution of 1µm (0.1mils).

The blasted profile is measured very quickly and with a high degree of accuracy by operating the instrument as follows. Place the Profile Gauge on the glass plate and zero the instrument. Now place the gauge on the blasted profile. The foot sits on top of the peaks and the sharp stylus travels to the bottom of the valleys allowing the gauge to display the peak-to-valley height. A number of measurements can be made to determine the average reading.

In addition to blasted profile evaluation, this gauge can also be used for pitting and cavity depths caused by corrosion.

Readings are switchable between metric and imperial.

Calibration Certificates having traceability to UKAS are available.

Supplied in a Carrying Case with Glass Zero Disk.

Part Number

R1006 - Digital Surface Profile Gauge

Accessories

NR002 - Calibration Certificate UKAS traceable

Surface Profile Gauge Analogue

The Paint Test Equipment Surface Profile Gauge will allow the peak to valley height of blast cleaned surfaces to be accurately measured in accordance with the ASTM standard

The gauge is initially set to zero with the glass zero plate and the foot is then placed on the blasted profile.

The foot sits on top of the peaks and the sharp stylus travels to the bottom of the valley, allowing the gauge to display the peak to valley height.

A number of measurements can be made and the average taken.

In addition the gauge can also be used to measure the effects of corrosion, i.e. pitting and cavity depth etc.

Smallest measurement on scale is 2 micron.

Supplied in Carrying Case with Glass Zero Plate.

Part Number

R1005 - Analogue Profile GaugeAccessories

NR002 - Calibration Certificate UKAS traceable