1. Auto-detecting 10/100Mbps Ethernet interface
2. RS-232 serial interfaces
3. Supports Windows Native COM drivers with automatic network connection recovery
4. Built-in Ethernet and TCP/IP protocol supports Driver Mode, TCP Server, TCP Client, UDP Server/Client, Ethernet Modem, Pair connection
5. Supports Linux fixed/real tty drivers
6. Built-in 15 KV ESD protection for all serial signals
Serial
| Standard |
Accord EIA RS-232,standard |
| RS-232 signal |
TX, RX, RTS, CTS, DTR, DSR, GND |
| Working format |
Asynchronous format, point to point, 2 wires half duplex, 4 wires full duplex |
| Runoff |
Support RTS/CTS Flow Control or non-flow control |
| Baud rate |
1200-230400bps |
| Bit byte |
5bit, 6bit, 7bit, 8bit |
| Check out |
No-checkout, odd, even, Mark checkout, Space checkout |
| Loading |
Point to point |
| Transmission |
5m |
| Interface protection |
600W surge protection, 15KV static electricity protection |
| Connector |
RJ45 |
Ethernet port
| Standard |
Accord 10Base-T/100 Base-T standard |
| Protocol |
Support TCP, UDP, APR, ICMP and DHCP protocol |
| Signal |
Rx+, Rx-, Tx+, Tx- |
| Working format |
Support Server and Client mode |
| Rate |
10/100Mbps, full-duplex or half-duplex |
| Memory |
Each port 16Kbit |
| Transmission |
100m |
| Electromagnetism isolate |
1500V |
| Connector |
RJ45 |
|
|
Inquiry Basket (0)
