Home  >  Products  >  Electronics & Electricity  >  Telecommunication & Broadcasting  >  Wireless Equipment

FEATURES:
One Embedded Card Slot
Dolby Digital 5.1 audio pass-through (optical)
Timer function for Sleep / Wake Up / VCR Record and Channel Reminder
Wake-up and Sleep Timers
Fully MPEG 2 / DVB compliant, MCPC/SCPC, C/KU reception
1 LNB input with IF loop through for 2nd receiver
Variable input symbol rate 2 ~ 45Msps
Manual PID scan function
DiSEqC 1.2 and USALS supported
Picture-In-Graphics function
Electronic Program Guide
Teletext supported by OSD and VBI
Multi language menu
Favorite channel group set-up and parental lock
Data transfer: receiver-to-receiver or PC-to-receiver
13V/18V LNB switching / 22KHz on/off
4 RCA connections (1 Video, 2 Audio L/R, 0/12V)

Specification:

Conditional Access Interface
Smart Card Slot
1 Embedded Card Slots
IF / Tuner
Input Frequency
950 MHz to 2150 MHz
Input Signal Level
-25 to -65dBm
Input Impedance
75 ohm nominal
Input Connector
F-type, IEC 109-24, Female
FEC Decoder
Convolution Code Rate l/2, 2/3, 3/4,
5/6 and 7/8 with Constraint Length K=7
Demodulation
QPSK
Symbol rate
2-45 Ms/s SCPC/MCPC
IF Frequency / Bandwidth
480MHz / 30MHz Type
LNB Power & Polarization
V13 / H18, 600mA MAX. over current protection
DiSEqC Control
Ver. 1.0 / 1.2 Compatible
DiSEqC
USALS compatible
Audio / Video Decoding
Video Decoder
MPEG-2 MP@ML (ISO/IEC 13818-2)
Input Rate
60Mbit/s Max
Video Resolution
720 x 576 (PAL)
Aspect Ratio
4:3, 16:9
Audio Decoder
MPEG 1- Layer I & II
Audio Mode
Mono L/R, Joint Stereo, Stereo
Audio Sampling Frequency
32, 44.1, 48 KHz
Audio / Video Output
Outputs
TV SCART, Video, Audio L/R, 0/12V
S/PDIF
Digital Audio Output, Optical
DOLBY DIGITAL 5.1 Pass-through
Serial Data Interface
Connector Type
9 Pin D-Sub (male)
Signal
RS-232C, Max. 115200Bps
Power Supply
Supply Voltage
100VAC ~ 250VAC 50~60Hz(SMPS)
Power Consumption
Max. 30W
Dimensions
260(W) x 210(D) x 45(H)mm