Single voice port that supports legacy (analog) touch-tone telephones Connects legacy telephones to IP-based networks Advanced pre-processing to optimize full-duplex voice compression High performance line-echo cancellation eliminates noise and echo Dynamic network monitoring to reduce jitter artifacts such as packet loss Clear, natural-sounding voice quality VoIP Specifications Radvision Sip stack version 3.0.4.0 Digest Authentication MD5 Record-Route Headers Hardware Characteristics Chipset: Conexant Chipset no: CX82100-41 Memory: 4MB Flash, 64MB SDRAM Voice codecs G.729A G.726 (option) G.711 A-Law G.711 U-Law Voice QoS: Diff serv STUN (Simple Traversal UDP Through NAT): RFC3489 Dual-tone multi-frequency (DTMF) DTMF tone detection and generation Mid-Call DTMF for IVR support RFC 2833 AVT tones Configurable for two sets of frequencies and single set of on/off cadence (US, UK) Line-echo cancellation G.165, G.168 compliant Echo canceller for each port 8 to128 msec configurable echo length Nonlinear echo suppression Convergence time = 250 ms ERLE = 10 to 20 dB 1 PSTN port interface (FXO) 1 VOIP port interface (FXS) LAN Protocols /Interfaces Ethernet interface Support 1 Port Ethernet Interface (10/100Mbps) which compliant with IEEE 802.3x standards 10/100 Mbps auto selection Ethernet ports support Automatic MDI/MDI-X configuration transceiver
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content. To report fraudulent or illegal content, please click here.