 |
|
|
Ceramic Ozone Generator (SY-G30)
|
|
|
|
Item: Ozone Generator
Model No.: SY-G30
Pipe: 184x91x77mm
Power: 150x52x42mm
Cooling: Air Cooling
Interface Sizes: $6mm
Power: 35W
Oxygen In 0.12m3/h: ozone output 2700mg/h
Oxygen In 0.18m3/h: ozone output 3700mg/h
Oxygen In 0.3m3/h: ozone output 3800mg/h
Ozone Generator Major Characteristics:
(1) High Efficiency: 800-1000g/m2, 4-5 times more than the common ozone generators
(2) Low Output: High frequency corona discharge, the consume rate of 8-10KW.h/kg O3
(3) Small Sizes: Save your space, the cubage is 1/4 to 1/3 than common ozone generators at the same output
(4) Very Long Life, Non-Coorode, Non-Oxygenization, High Temp. Resistance: Imported material to be sintered into the high purified ceramic, 316 stainless inner electrode and tighten firmware, polytetrafluorethylene/Teflon, high purified silicon rubber material, all the pipes equipped with radiator slice, 10 years normal life
(5) No Break: the generating pipe with the working voltage of 10% of the Breaking voltage, high non-conductivity rate, low power
(6) Effective Cooling Systems: there is outer air cooling and inner water cooling combination, low degradation rate at continuous working
(7) Good Voltage Flexibility: 50V to generate ozone and 200V to get the efficiency, convenient to adjust the ozone levels
(8) Save Oxygen Source: High ozone density/output and save the oxygen cost
|
|
|
|
|
click for larger image
Img 1
Img 2
Img 3
Img 4
Img 5
|
|
|
|
This member assumes full responsibility for the content of this listing. DIYTrade accepts no responsibility whatsoever in respect of such content.
To report fraudulent or illegal content, please click here. | |
China Suppliers Quick Searching:
, , , |
|
|
|
|
Inquiry Basket (0)
