Home  >  Buy  >  Trade Leads  >  Industrial Supplies  >  Machine Hardware  >  Sealing & Gaskets

Operating Conditions Pressure: Up to 12bar or 174psi Speed: Up to 10m/s or 33ft/s Temperature: -40Degree Celsiusto 200 Degree Celsiusor -40Fto 390F (depending on materials used)

Mediums: Water, oil, organic liquids, middle corrosion liquids and other mediums including solid granule. Pressure: Up to 20bar or 290psi Speed: Up to 25m/s or 82ft/s Temperature: -40 Degree Celsius to 230 Degree Celsiusor -40F to 446F depending on materials used To ISO 3069 and DIN 24960 ...

Pressure: Up to 0.6Mbar Speed: Up to 10m/s or 32ft/s Temperature: -30 Degree Celsius to 200 Degree Celsius or -30F to 390F depending on materials used Material Seal face/Primary ring: Carbon graphite, Silicon carbide. Seat/Mating ring: Alumina ceramic, Silicon carbide. Secondary seals: N...

Mediums: Water, oil, organic liquids, middle corrosion liquids and other mediums including solid granule. Pressure: Up to 10bar or 145psi Speed: Up to 20m/s or 66ft/s Temperature: -40 Degree Celsius to 230 Degree Celsius or -40F to 446F depending on materials used To ISO 3069 and DIN 24960

Pressure: Up to 2Mpa Speed: Up to 25m/s or 75ft/s Temperature: -75 Degree Celsius to 200 Degree Celsius depending on materials used Material Seal face/Primary ring: Carbon graphite, Silicon carbide, Tungsten carbide. Seat/Mating ring: Silicon carbide, Tungsten carbide. Secondary seals: ...

GOT Asbestos Rubber Sheet is made from selected asbestos fiber, natural rubber, filling material and dye. A price worthy quality of dependable performance, in addition, being suited to many sealing requirements makes this jointing the most economical sheet packing choice in the wide range of industr...

The high quality Du Pont Aramid Fiber dips PTFE emulsion and lubricating additives. The most outstanding performance is high strength, meanwhile a relatively good chemical resistance, high resilience, low cold flow. Although it is quite wearing resistant, used improperly, it will wear out the pump ...

It is cut or punched by pure graphite sheet or metal (truss plate, flat plate, net) reinforced graphite sheet, with mass of excellent sealing performance, e.g.: thermal stability, self-lubricating, no aging, non-fragility, etc. Under extreme conditions, it can be stably and long-term used, extremely...

GOT Kammprofile gasket , generally processed to be concentric groove in the two faces of the stainless steel flat gasket by precise lathes. According to the different medium, w can choose flexible graphite, PTFE, non-asbestos, or other soft metal, to sick to the two faces of the gasket. It can dire...

GOT-400 Spiral Wound Gasket is accumulated, hovered and wound, and spot welded beginning and end terminal by V-shaped or W-shaped stainless steel and non metal filler, which has good compression elasticity, and is suitable for the sealing parts with temperature and pressure altering violently. It is...

NON-ASBESTOS GASKETS 　 　　 Non-asbestos Gasket is a sealing material made by adding special adhesives and a little packing into it, then roll and sulfurated. It is a replacement of asbestos gasket.Non-asbestos Gasket has better strength,elasticity and supper strong anti-penetrate performance.It...

◆Ceramic ring/Alumina ceramics/Zirconia ceramics SINOREC CERAMIC (YIXING) CO., LTD.,a leading enterprise specilizied in manufacturing electronic ceramics and engineering ceramics in China, is located in Dingshan Town,Yixing City,Jiangsu Province, a place well-known both in China and abroad "Cermics...

EXPANDED PTFE TAPE EXPANDED PTFE JOINT SEALANT TAPE： Detailed information of the products Pure expanded PTFE joint sealant tape with adhesive back is an unique cord form gasket for use as a jointing on all types of flanges and can be used with almost all fluids for its excellent corrosion...

Graphite tape,Graphite Corrugated Tape and Graphite Self-adhesive Tape The flexible graphite corrugated tape and self- adhesive tape are made of expanded graphite tape pressed by figured roller. The tape normally used moulded for packing rings, can be wound on valve rod and pump axis directly, for...

Spiral Wound Gasket is the best in the compression resilient in all the half-metal seal gasket, which is made by the metal hoop band and different kinds of packing material. We can make its structure density according to the demand of different locking force, and we use the inner and outer circle to...

Sealing Packing & Gasket Series: We can supply many kinds of Sealing Packing, Such as PTFE ( Teflon ) packing, Aramid Fiber (Kevlar Fiber) Packing, Carbonized Fiber Packing, Expanded Graphite Packing, Asbestos PTFE Packing ect.; We also can supply many kinds of Sealing Gasket, Such as Expanded graph...

RS-5002 Ring joint gasket (RTJ gaket) are manufactured in accordance with JPI-7S23, ANSI B16.20 and API 6A used on the ring type joint flanges specified in JPI-7S-15, ANSI B16.5, API spec 6A and MSS sp-44.These Gaskets are manufactured in different solid metal types like soft iron/SS304/316/321 meta...

RS-5001 Spiral wound gasket is formed of V-shaped of W-shape stainless steel stripe and soft nonmetallic packing or the material of flexible graphite asbestos, nonasbestos, PTFE etc by means of piled. it can use inner ring and outer ring as different material such as carbon steel , stainless steel 3...

RS-5003 Double Jacketed Gasket has characteristic of metallic and nonmetal, with excellent sealing performance, especially made of each kind of complex shape. Double Jacketed Gasket with greatness diameter not easy to fall apart and not easy to damnify, the most temperature is 800, the pressure is <...

RS-5004 Non-metal flexible gasket is made from kinds of gasket material , it can made from asbestos and non-asbestos gasket sheet , graphite sheet, and paper gasket material of asbestos / non-asbestos gasket paper . it widely used in industrial field and the temperature , pressure and size are accor...