有源差分探头SI9110/SI9101/SI9002/三华
 |
| 型号： | SI9110/SI9101 | ||
|---|---|---|---|
| 品牌： | 台湾三华 | ||
| 原产地： | 台湾 | ||
| 类别： | 电子、电力 / 电源和配电设备 / 不间断电源 | ||
| 关键字： | 台湾三华 , 差分探头 , 隔离探棒 | ||
| 单价： |
CNY
¥ 6000
/ 台
| 最少订量： | 1 台 |
| 发布时间︰ | 2009/11/02 | 更新时间︰ | 2009/11/02 |
  |
|||
SI9001/SI9002
Bandwidth 25MHz
Accuracy +/- 2%
Input Impedance 4Mohm//5.5pF each side to ground
Output Voltage
- Swing (into 50kohm load) +/-7V
-Offset (typical) <+/-5mV
-Noise (typical) 0.7mVrms
Power Requirements
-Standard 4xAA cells or 6VDC/60mA mains adaptor
or regulated 9VDC/40mA mains adaptor
-Options Power leads
Length of BNC Cable
Length of input Leads
Weight
Dimension(LxWxH)
Specifications | SI9001 | SI9002 |
Attenuation Ratio | 1:10/100 | 1:20/200 |
CMRR(typical) | -86dB@50Hz, | -80dB@50Hz, |
Differential Input voltage | +/- 70V@1/10 | +/- 140V@1/20 |
Common Mode Voltage | +/- 700V@1/10 & 1/100 | +/- 1400V@1/20 & 1/200 |
Absolute Max. Input | 1000Vrms CAT III | 1000Vrms CAT III |
SI9101/SI9110
Bandwidth DC to 100MHz (-3dB)
Accuracy +/- 2%
Input Impedance 4Mohm//7pF each side to ground
Output Voltage
- Swing (into 50kohm load) +/-7V
-Offset (typical) <+/-5mV
-Noise (typical) 0.9mVrms
-Source Impedance (typical) 50 ohm (for using 1M ohm input system oscilloscope)
Power Requirements
-Standard 4xAA cells or 6VDC/200mA mains adaptor **
or regulated 9VDC/120mA mains adaptor **
-Options Power leads
Length of BNC Cable
Length of Input Leads
Weight
Dimension (LxWxH)
Specifications | SI9101 | SI9110 |
Attenuation Ratio | 1:10/100 | 1:100/1000 |
CMRR (typical) | -85dB@50Hz, -55dB@1MHz | -80dB@60Hz, -50dB@1MHz |
Differential Input voltage | +/-70V@1/10 | +/-140V@1/100 |
Common Mode Voltage | +/-700V@1/10 & 1/100 | +/-1400V@1/100 & 1/1000 |
Absolute Max. Input | 1000Vrms CAT III | 1000Vrms CAT III |
SI9010
Bandwidth DC to 70MHz(-3db)
Attenuation Ratio 1:100/1000
Accuracy +/- 2%
Input Impedance 10Mohm//10pF each side to ground
Input Voltage
-Differential Input Voltage +/-700V(DC+Peak AC)or 700Vrms@1/100
7000V(DC+Peak AC) or 5000Vrms@1/1000
-Common Mode Voltage +/-7000V(DC+Peak AC)or 2500Vrms@1/100 & 1/1000
-Absolute Max. Voltage +/-7000V(DC+Peak AC) or 2500Vrms@1/100 &
1/
+/-7000V(DC+PeakAC)or5000Vrms@1/100&1/1000 in differential mode
Specifications | SI9010 |
Attenuation Ratio | 1:100/1000 |
CMRR (typical) | -85dB@50Hz, -55dB@1MHz |
Differential Input voltage | +/-700V@1/100 |
Common Mode Voltage | +/-7000V@1/100 & 1/1000 |
Absolute Max. Input | 5000Vrms CAT III |
| 付款方式︰ | 电议 |
点击图片放大
图 1